LoRaWAN Smart Gas Meter Solution with Wireless Remote Real-time
Monitoring and Control Capabilities
Intelligent gas meter is a new generation of centralized reading
gas meter terminal. It is applicable to the flow measurement of
natural gas, liquefied petroleum gas, artificial gas and other
gases. It integrates gas meter metering, remote reading and
monitoring. The meter has the characteristics of high reliability,
high accuracy and low power consumption.
Type YW-TW intelligent gas meter based on the IoT adopts LoRaWAN
wireless transmission technology. Automatically upload gas
consumption data to the application platform to realize remote
monitoring of gas meter usage status. It solves the problems of the
traditional gas meter, such as the difficulty of over-reading the
meter at home, the difficulty of paying the fee,and the inaccuracy
of the supply and marketingdifference. Explosion-proof sign
ExibIIBT3 Gb. It is applicable to Zone 1 and Zone 2, containing
IIA-IIB and T1-T3 explosive gas mixture.
1. Adopt LoRaWAN wireless technology. Effectively increase the
anti-interference ability of the communication system and improve
the
accuracy of the received data.
2. The gas meter adopts the form of system prepayment. The valve
switch of the gas meter is realized by the command from the system
platform.
3. Timing (once a day)(settable) and key wake-up to transfer data
to the platform. It improves the response speed of meter reading
and
reduces battery energy consumption.
4. When the voltage is low or abnormal,the LCD screen will
automatically display the fault information, beep the alarm, and
close the valve.
5. It has a built-in antenna.The transmission signal is stable and
reliable.
6. The platform can remotely check the user's gas
consumption,battery usage,and remotely control the valve switch of
the gas meter.
- Specifications & technical parameters
| Specifications | G(J)1.6 | G(J)2.5 | G(J)4 |
| Nominal flow(m3 /h) | 1.6 | 2.5 | 4 |
| Maximum flow(m3 /h) | 2.5 | 4.0 | 6.0 |
| Minimum flow(m3 /h) | 0.016 | 0.025 | 0.040 |
| Working Pressures(kPa) | ≤30 |
| Total Pressure Loss(Pa) | ≤250 |
| Accuracy Level | 1.5 Class |
| Basic Error Lines | qmin≤q< qt ±3.0% qt≤q≤qmax ±1.5% |
| The tightness of the machine | It can last for 3 minutes without leakage under 1.5 times of the
maximum working pressure |
| Operating Ambient Temperature(℃) | -25℃～ +40℃ |
| Inlet and Outlet Connector Threads | M30×2 |
| Maximum Display Capacity of LCD(m3) | 999999 |
| Maximum reading of base meter(m3) | 99999.999 |
| Power supply mode | Four AA Alkaline dry batteries(AA LR6 1.5V) |
| LoRaWAN frequency band (MHz) | CN470,RU864,IN865,EU868,US/AU915,KR920,AS923_1/2/3/4, Custom Channels |
| Barrier-free meter reading distance | >3000m |
| Compliant standards | GB/T 6968-2019,GB/T 3836-2021 |
•Consumption: cumulative consumption of gas meter
• Valve off/valve on: indication of valve switch status of gas
meter
• Lobat: when the battery voltage of the gas meter is insufficient,
the LCD screen will prompt "Lobat" and close the valve.
After replacing the battery, press the button to open the valve.
• Fault code:
Err005:forced valve closing
Err006:strong magnetic interference Err008:valve fault
Err010:pulse signal input abnormality Err023:pre-closing valve
Err030:limited networking times in a single day
- Overall dimension (unit: mm)
| Specifications | W(mm) | W1(mm) | H(mm) | CC(mm) | L(mm) |
G1.6 | 152 | 62 | 227 | 130 | 172 |
G2.5 | 152 | 62 | 227 | 130 | 172 |
| G4 | 172 | 72 | 259 | 130 | 192 |
| J1.6 | 170 | 69 | 221 | 130 | 202 |
| J2.5 |
| J4 |
- Installation and usage considerations
1. The installation shall be carried out in accordance with GB/T
3836.15-2017 Explosive Atmospheres - Part 15: Design, Selection and
Installation of Electrical Installations. The installation of
meters shall be carried out by professionals of the gas company for
initial installation and commissioning.
2. This product has undergone explosion-proof treatment and shall
not be changed at will.
3. The product shall not be collided or severely impacted during
transportation, and shall be protected from rain and sand.
4. This product should be stored in a ventilated and dry place.
5. It is prohibited to detect leakage in case of open fire. When
piloting fire, the air in the gas meter must be exhausted to
prevent accidents.
6. When installing the battery, note that the side with the spring
is the negative pole of the battery. The battery shall be replaced
under the condition of good ventilation and no gas leakage.
7. Electrostatic hazard, so must be wiped with wrung wet cloth.
WUHAN TIMEWAVE IOT TECHNOLOGY CO.,LTD
Website:http://www.tw-iot.cn/
Helpline: 400 8066 589
O&M hotline:19947604764
Address: 603,building1, Guanggudingchuanginternational, No.51GuangguAvenue, JiangxiaDistrict,Wuhan, HubeiProvince, China
